 |
Polysulfide Sealant Removal (Cured)
SkyKleen 1000 has been found to be a superior product for the removal of
cured polysulfide sealants, commonly used through the airframe and has been
approved to the Douglas CSD-1 type 3 specification. Attacking the adhesive
bond between the sealant and the surface to which it has been applied,
SkyKleen 1000 allows lifting of large patches of sealant at a time.
Apply SkyKleen
1000 to the interface of the sealant and the airframe
surface. Using the standard plastic or wooden scraper, pry the sealant
up using a back and forth motion allowing the SkyKleen 1000 to flow
to the front of the scraper. For thicker sealant layers a pre-soak period
is recommended.
For overhead or vertical surfaces, SkyKleen 2000 paste will provide
the ability for prolonged soak time as it adheres to the surface.
Polysulfide Sealant Removal (Partially Cured or Uncured)
The properties of SkyKleen 1000 enables a fast and effective clean-up of wet
or partially cured sealant.
Soak the sealant with SkyKleen 1000, allowing it to penetrate the bead.
Scrape off excess sealant with a plastic scraper. Finish the job by wiping
the surface with a clean, dry cloth.