 |
Material Compatibility
| Teflon | OK |
| Acetal (Delrin 500) | OK |
| Nylon | OK |
| Epoxy | OK |
| Polyester | OK |
| Polyethylene | OK |
| Polypropylene | OK |
| EPR | OK |
| Neoprene | OK |
| Butyl Rubber | OK |
| ABS | Not Recommended |
| Acrylic | Not Recommended |
| Nitrile | Not Recommended |
| Ink | Not Recommended |
| Polycarbonate | Not Recommended |
| Polystyrene | Not Recommended |
| Polyvinyl Chloride | Not Recommended |
| Silicone Rubber | Not Recommended |
NOTES:
Material compatibility should be tested before any extensive use of
SkyKleen 1000 on aircraft.
If a material is not recommended for use with SkyKleen, then it should
NOT be used to clean such surfaces. In such cases, however, SkyKleen
is likely to be a good solvent for removal of this material.
SkyKleen has been found to be non-corrosive to most metals and alloys
used in aircraft construction.
